Compact form factor
Industry leading compact dimensions for MCCs, pump panels and retrofit enclosures.
ANSI rated
Full ANSI rated protection with an overload capacity of 500% for 60 seconds.
Field proven
Thousands of installations across all industries worldwide.
Motortronics iERS
The intelligent Energy Recovery System is fitted as standard on all units.
Four built in ramp controls
Voltage ramp, voltage ramp with current limit, CLT© closed loop torque ramp and current step. Ramp times adjustable 1–120 seconds.
Start and run protection
Two programmable overload trip curves, Class 5 to 30, with manual, automatic or remote reset.
Pump-Flex™ deceleration
Adjustable deceleration control for pumping and other variable load applications.
Kick start and jog
Kick start 10–100% starting torque for 0.1–2 seconds; dry contact selectable non-ramping jog at an adjustable torque.
Electronic shear pin
100–300% of motor FLA with adjustable trip delay.
Comprehensive protection
Equipment ground fault, phase imbalance and loss, shorted SCR lockout, shorted load check prior to each start and phase rotation detection.
Motor duty cycle protection
Back-spin / coast-down, starts-per-hour or minimum time between starts lockouts, plus restart delay after a power failure.
RS-485 serial communications
Modbus RTU protocol built in, up to 247 starters per link, with full programming and remote control over the serial link.
Operator interface
Tactile feedback keypad with an easy to read LED display and run and fault status indicators.